Fruit leftovers rotary dryer
Writer: admin Time:2019-03-26 13:47 Browse:℃
Product Introduction
Fruit leftovers dryer uses high-temperature and rapid drying process, Dongding has uccessfully solved the technical problems such as high initial moisture content, sticky physical properties of the raw material by adopting of a series of unique techniques, reaching an efficient drying.
The system is suitable for drying fruit pump discharged from fruit processing such as apple, pineapple and orange processing.
Product Composition & Working Priciple
Fruit leftovers dryer consists of the heat source, feeding machine, rotary drum, discharging machine, induced draft fan, discharge devices, and distribution cabinet.
Firstly, The wet material is put into the dryer after dehydration, then fruit residues is transported to the rotary drum dryer by the belt conveyor, where it fully contact of the hot air, because of the inclination of drum dryer, material with hot air moves to the end of dryer body. After drying, most of the dry material will be discharged through the belt conveyor, the left material will go into the cyclone dust collector, where the dust will be collected, with the function of induced draft fan, the left material will discharged through the conveyor.
Product Features
■ Big moisture reduction, residues with an initial moisture content of 82% can be dried down to less than 13%.
■ High capacity, daily drying capacity of residues is between 80t~500t
■ Stable operation under high temperature conditions.
■ Automatic control, easy operation.
■ Pellet fruit residue feedstuff can be produced through grinding, mixing, pelleting and packing following the drying process.
Product Parameter
Model |
DDSG1210 |
DDSG1412 |
DDSG1615 |
DDSG1918 |
DDSG2218 |
DDSG2523 |
DDSG2925 |
Capacity(t/d) |
20-45 |
25-65 |
40-90 |
50-125 |
70-220 |
90-320 |
110-400 |
Initial Moisture(%) |
75-80% |
75-80% |
75-80% |
75-80% |
75-85% |
75-85% |
75-85% |
Final Moisture(%) |
<12% |
<12% |
<12% |
<12% |
<12% |
<12% |
<12% |
Drying Temperature (℃) |
250-300℃ |
250-300℃ |
250-300℃ |
250-300℃ |
300-350℃ |
300-350℃ |
300-350℃ |
Total Power(KW) |
28-33 |
34-40 |
45-60 |
51-75 |
60-90 |
95-125 |
110-155 |
Floor Area(m2) |
5x15 |
5x18 |
6x22 |
7x25 |
8x30 |
10x35 |
10x40
|