Ten precautions for the maintenance of coal slime dryer

Writer： admin Time：2019-04-24 10:15 Browse：℃

For the Coal Slime Dryer we also should always pay attention to its operation of maintenance problems. Zhengzhou Dongding coal slime dryer manufacturers summed up the top ten considerations of the coal slime dryer operation maintenance.

1, To ensure that its wheel axis and drying cylinder center line are in parallel during the operation coal slime dryer. Slime dryer operators should always observe and know clearly about the operation status of the wheel, determine the contact between the wheel and the wheel belt, the wheel belt and the retaining wheel and the position of the cylinder (that is, the upper end band is in the position between the two gears). In the slime dryer installation or regular inspection, as long as the surface of the wheel is smooth, just use the wire about 2mm diameter rolling in the wheel belt and wheel rollers , if the lead wire are equal width of the rectangular strip, indicating that the wheel axis in parallel to the center line of the cylinder; on the contrary, the wheel axis should move in parallel to the direction away from the cylinder body and the center line if the force that is too large, or move to the center line near the cylinder if the pressure is too small.

2, The transmission, support, retaining wheel device of coal slime dryer must be constantly inspected. If there is noise, vibration and heating and other abnormal conditions should be reported in time.

3, According to the relative displacement between the belt and pad in a turn to judge the gap and wear, pay attention to the pad weld has no cracks or not.

4, Slime dryer operators need to check the transmission base and support part of the foot bolts and other connecting bolts each time finish the work, if loose should be tightened in time.

5, To pay attention to its foundation when coal slime dryer work at all times to check if has vibration and sinking phenomenon or not.

6, Regularly check the coal slime dryer equipment sealing device wear and contact situation.

7, Regularly observe the inside of the cylinder heat-resistant materials and feed plate wear, to check the loosening and drop conditions, and timely replace the accessories of problem.

8, Carefully check the sound of the reducer at least two times, to ensure that it has no abnormal murmur and noise.

9, Coal slime dryer maintenance personnel and operators need to work closely to  timely get the communication and resolution, to prevent accidents affecting the normal production and operation.

10, For the coal slime dryer lubrication, lubricant should be used in accordance with the provisions. If use the substitutes, they must meet the requirements of the required oil performance, absolutely do not allow the use of oils and oils mixed, prevent the damage to the coal slime dryer accessories.

Zhengzhou Dongding coal slime dryer manufacturer is one of the regular drying machine manufacturers in Henan province, the production of coal slime dryer equipment are sold at home and abroad, in all parts of the market have a good response. If you need to know more about the maintenance of slime dryers, please call us at :
+86-371-55091029  
Tel: +86 18538798892
Email: dongding@zzddjt.com